Flow Threader

Organic texture. Fluid movement. Worn against the ear.

Most earrings sit at one point or hang below it. The Flow Threader lies flat against the ear instead, a long, tapered blade that follows the ear's natural line.

The blade is 925 sterling silver with rhodium plating, 2cm long and 4mm at its widest. It's broader at the top and narrows to a fine point, with a gentle organic curve. Its front is hammered all over with irregular dimples. A smooth surface gives back one reflection. A hammered surface gives back dozens of small ones, each dimple catching light at a slightly different angle. So the blade glows softly rather than flashing, and the light shifts as you move.

A simple silver hook wire passes through the piercing behind the lobe and holds the blade flat against the front. There's no clasp and no mechanism, just clean lines.

In a composed ear, it's the long vertical line. Wear it at the primary lobe, then keep the pieces above it small, such as studs and huggies, so its textured length has room to lead.

Organic texture. Fluid movement. Worn against the ear.

Key Features

1. Hammered Dimple Texture
Irregular indentations across the front of the blade scatter light into a soft, shifting glow.

2. Tapered 2cm Blade
Wide at the top and fine at the tip, with a gentle organic curve.

3. Lies Flat Against the Lobe
The blade follows the ear's line instead of hanging free.

4. Simple Hook Wire
A U-shaped silver wire that holds the blade with no clasp.

5. No Stone, Pure Texture
The hammered metal carries the whole design.

6. Sold Singly for Ear Curation
One piece, made to be the vertical line in your stack.

Product Details

FAQ

What is an ear climber?
An ear climber is an earring that lies along the surface of the ear, instead of sitting at a single point or hanging below the piercing. On the Flow Threader, a hook wire passes through your lobe piercing, and the 2cm blade rests flat against the front of the lobe, following the ear's line.

How secure is the hook wire?
The hook's natural tension, and the blade resting against your lobe, keep it in place during normal movement. Because it has no clasp, it can slip out during exercise, when you pull clothes over your head, or while you sleep. Take it off for those, and add a small clear silicone earring stopper to the end of the hook if you'd like extra security.

Why does hammered silver catch light differently?
A smooth, polished surface reflects light in one even sheet. A hammered surface is covered in tiny dimples, and each one reflects light at a slightly different angle. Together they make a soft, scattered glow that shifts as you move.

Where should I wear the Flow Threader?
The Flow Threader is designed for a healed primary lobe piercing, where the blade has room to lie flat. Keep the pieces above it compact, such as small studs or huggies, so the blade stays the main line of the stack.

Can I wear the Flow Threader in a new piercing?
No. It's for fully healed piercings only. Sterling silver can irritate a healing piercing and may discolour the skin. For a fresh piercing, choose implant-grade titanium, like the pieces in MNML's Elements collection.

How do I care for hammered silver?
Lotion and dust can collect in the dimples, and tarnish tends to show there first. Brush the blade gently with a soft, dry toothbrush, then wipe it with a soft cloth. Store it dry in its pouch.

Will the Flow Threader tarnish?
Sterling silver can darken over time, and rhodium plating wears gradually with regular use, often faster in humid weather. Keep it away from perfume, lotion and chlorine, and wipe it after wearing.

Can I shower or swim with the Flow Threader?
No. Take it off before showering, swimming, exercising or sleeping. Water, sweat and chlorine speed up tarnishing, and the hook can slip out during activity.

Is the Flow Threader suitable for sensitive ears?
Rhodium plating over 925 sterling silver is well tolerated in healed piercings by most people. If your ears react easily to metals, the titanium pieces in MNML's Elements collection are the most reliable choice.

Is the Flow Threader sold as a pair?
No. It's sold as a single piece for ear curation.